Loose Foam Pit Logs – Our loose foam logs are manufactured in the UK, meet BS 5852 (Part 2 1982) Fire Retardancy and have varying degrees of densities (23-35 Kg/m3), hardness (110-205) and sizes (50x10x10cm or 60x12x10cm). Typically, the loose foam pit will have a 300mm base layer of foam and will be filled with loose foam logs until the pit is full, we can work out the amount of foam required to fill the pit and usually, add 10% due to the loose foam compacting over time. The loose foam logs are available in a variety of colours and can be covered with our loose foam socks which are also available in a variety of colours.

Loose Foam Pit Cubes & Blocks – Our loose foam blocks are manufactured in the UK, meet BS 5852 (Part 2 1982) Fire Retardancy and have varying degrees of densities (23-35 Kg/m3), hardness (110-205) and sizes (15x15x15cm or 20x20x20cm). Typically, the loose foam pit will have a 300mm base layer of foam and will be filled with loose foam blocks until the pit is full, we work out the amount of foam required to fill the pit and usually, add 10% due to the loose foam compacting over time. The loose foam blocks are available in a variety of colours and can be covered with our loose foam socks which are also available in a variety of colours.

Resi-Pit Foam – this is 600mm high and has a 200mm upstand. The 600mm base foam is made up from varying foam densities allowing for a more progressive shock absorption when landing. The 200mm foam upstand has diagonal edging and is covered by either a stretch ‘Jersey’ fabric or PVC/vinyl mesh both available in a variety of colours. The covering is held in place by a PVC edging which can removed to re-stretch the cover and unlike other suppliers, we can manufacture the cover in sections so, if one does become damaged it can be easily replaced without having to replace the whole cover.